When I first put the rover robot together, I used a camera mount that came with the camera. However this was inclined slightly upwards meaning it was difficult to see what was directly ahead. For
When making a pan/tilt mount *link & article pending* for my PiRover robot, I ran into some issues with badly jittering servos. Following some suggestions on the excellent YouTube video from Gary Explains, did not
Following on from previous posts about building a Raspberry Pi imaging server using Astroberry, the next stage was to add a remote focuser and dew heater control. Remote focusers are quite expensive, however small low
Small infrared remotes are a cheap way to add a level of remote control to a Raspberry Pi project. The one pictured below was under £5 (from Everything Pi) for the remote and IR receiver